SHURE SM86 Vocal Microphone

SHURE SM86 Vocal Microphone
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance.

SM86-LC Cable not included.
  • Condenser cartridge for studio quality sound
  • Tailored frequency response for a clear reproduction of vocals
  • Rugged construction withstands the rigors of touring sound
  • Cardioid polar pattern minimizes unwanted background noise
  • Excellent choice for stage monitors and personal monitors
  • Built-in three-point shock mount minimizes handling noise
  • Two-stage pop filter reduces wind and breath noise
Our Price$469.00
CodeSHRSM86

  • Transducer Type Condenser (electret bias)
  • Frequency Response 50 to 18,000 Hz
  • Polar Pattern Cardioid
  • Output Impedance 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms
  • Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)
  • Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
  • Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB
  • Self-Noise 23 dB typical, A-weighted
  • Dynamic Range (1000 ohms) 124dB (maximum SPL to A-weighted noise level) Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
  • Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
  • Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA
  • Connector Three-pin (XLR) professional audio
  • Case Dark gray enamel-painted steel with matte-finished silver colored steel grille
  • Net Weight Net: 278 grams (9.8 oz)
  • Environmental Conditions Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%) Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)
No recommended products at the moment.