SHURE STUDIO CONDENSER MIC

SHURE STUDIO CONDENSER MIC
Large dual-diaphragm, externally biased microphone with extremely low self-noise

The KSM44/SL is a multiple pattern (cardioid, omnidirectional, bidirectional), externally biased, dual large diaphragm condenser microphone with extremely low self-noise (7dB). Developed to meet the needs of studio recording musicians, the warm, rich sound of the KSM44 delivers exceptional performance, tailored to deliver vivid reproduction of voice for the most critical recordings. The KSM44 also offers great flexibility in a variety of recording applications, working well on acoustic and amplified instruments, as its capacity for managing high SPLs accommodates loud sound sources such as drums and guitar amplifiers.
Our Price$1,849.00
CodeSHRKSM44SL

  • Cartridge Type Externally biased condenser
  • Frequency Response 20 to 20,000 Hz
  • Output Impedance 150 ohms (actual)
  • Attenuation Switch 0 or 15 dB attenuation
  • Low Frequency Response Switch Flat; -6 dB/octave below 115 Hz;-18 dB/octave below 80 Hz
  • Phantom Power 48 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3
  • Current Drain 5.4 mA typical at 48 Vdc
  • Common Mode Rejection > 50 dB, 20 Hz to 20 kHz
  • Polarity Positive pressure on front diaphragm producespositive voltage on output pin 2 relative to pin 3
  • Directional Polar Patterns Cardioid Omnidirectional Bidirectional
  • Sensitivity (typical; at 1000 Hz; 1 Pa = 94 dB SPL) -31 dBV/Pa -37 dBV/Pa -36 dBV/Pa Self-noise(typical, equivalent SPL; A-weighted, IEC 651) 7 dB 10 dB 10 dB Maximum SPL @ 1000 Hz 2500 ohm load (Attenuator on) 132 (149) dB 138 (151) dB 137 (150) dB 1000 ohm load (Attenuator on) 127 (144) dB 132 (145) dB 131 (144) dB
  • Output Clipping Level* 2500 ohm load 7 dBV 7 dBV 7 dBV 1000 ohm load 1 dBV 1 dBV 1 dBV
  • Dynamic Range 2500 .ohm load 125 dB 128 dB 127 dB 1000 ohm load 120 dB 122 dB 121 dB
  • Signal to Noise ratio** 87 dB 84 dB 84 dB Dimensions and Weight 55.9 mm (2.20 in.) maximum body diameter, 187 mm(7.37 in.) long; 490.5 grams (17.30 oz).
  • <20 Hz to 20 kHz;THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL. **S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
No recommended products at the moment.